Call Now

Shower Remodeling in Phoenix AZ for Every Home and Every Style

We build tiled shower surrounds, steam shower enclosures, and walk-in showers for Phoenix homeowners. Every project starts with proper concrete prep and ends with a clean, lasting finish.

Your shower is one of the hardest working parts of your home. It gets used every single day. When it starts to crack, leak, or look worn out, the whole bathroom feels off.

A full shower remodel fixes the problem the right way. We do not patch over old damage. We start from a solid base and build everything correctly from the ground up. This means your new shower holds up for years, not months.

We are a licensed shower remodeling contractor in Phoenix, AZ. Our team handles every step. We remove your old shower, prep the surface, tile the walls, seal the floor, and install the glass. We also build custom steam showers for homeowners who want something extra.

As part of our full bathroom remodeling services, we specialize in shower rebuilds across Phoenix, Scottsdale, Arcadia, Ahwatukee, and the entire Valley.

Every project starts with a free visit. We look at your space and give you a written price before anything begins.
Get a Free Shower Estimate
Call Now

Why Phoenix Homeowners Choose Us for Shower Remodeling

Most bathroom contractors in Phoenix do similar work on the surface. The difference shows up inside the walls. A missed waterproofing step or a skipped prep stage causes mold and water damage. You will not see it right away. But in a year or two, you will. By then, fixing it costs far more than the original project.
Here is what makes our team different.

We Always Do the Prep Work

Many contractors skip Concrete Prep to save time. We never skip it. Every shower we build starts with a full base inspection, crack repair, slope check, and Waterproof Membrane installation. That foundation is what makes a shower last.

We Build for Desert Conditions

Arizona heat stresses tile, grout, and adhesive more than most climates. Materials expand in summer and pull apart in winter. We use products and methods that are proven to hold up in Phoenix temperatures. This means your shower does not crack, separate, or fade.

We Pull All Required Permits

Arizona law requires permits for structural, electrical, and plumbing work in residential remodels. Steam shower electrical work requires a permit under the Phoenix Building Services code. We pull every required permit before work starts. We hold an active Arizona ROC contractor license, number [CLIENT: ROC LICENSE NUMBER].

Our Price Is in Writing Before We Start

You receive a full written estimate before we begin. That is the price you pay. We do not add charges mid-project. Homeowners in Chandler, Gilbert, and Tempe tell us this is the main reason they call us back.

We Cover the Whole Valley

We travel to Phoenix, Scottsdale, Arcadia, Ahwatukee, Biltmore, North Central Phoenix, Desert Ridge, Chandler, Gilbert, Tempe, Glendale, Peoria, and Paradise Valley.

Tiled Shower Surrounds in Phoenix AZ

  • A tiled shower surround changes more than just how your shower looks. It makes the whole space easier to clean and protects your walls from water damage. We cover your shower walls with ceramic tile, porcelain tile, or natural stone. Each one holds up well and looks clean for years.
  • We work on all types of showers. This includes walk-in showers, corner showers, alcove showers, and wet rooms. We help you pick the right tile for your budget and your space. Next, we build it from start to finish using the right materials for Phoenix's climate.
  • We serve homeowners in Arcadia, Biltmore, North Central Phoenix, Scottsdale, and across the Greater Phoenix area.

What Goes Into a Tiled Shower Surround

Most people only see the tile on the wall. What they do not see is everything behind it. That hidden layer is just as important as the tile itself.
  • First, we install Cement Backer Board on every shower wall before tile goes up. This gives the tile a firm, moisture-resistant surface to bond to. Next, we apply a Waterproof Membrane over the backer board. This stops water from reaching the wall framing behind the tile.
  • After that, we lay out the tile pattern and cut each piece to fit. We use an adhesive that works in Phoenix heat without breaking down. Then we grout every joint and seal the whole surface. The result is a shower wall built to last in desert conditions.
  • Also, if your current shower walls are soft or cracked, we repair them before we start. You will not find hidden damage behind your new tile.
See our bathroom tile flooring services for full tile projects beyond the shower.

Concrete Prep and Surface Repair for Tiled Showers

Every good tile job starts long before the first tile goes up. The surface underneath must be solid, level, and sealed. This step is called Concrete Prep. It is one of the most important parts of any shower project. When it is skipped, tile cracks and grout fails within months.
Phoenix showers face extra pressure. The desert heat makes materials expand in summer and shrink in fall. If the base is uneven or cracked, that movement breaks the tile above it.
Here is what we do:  
  • We check your shower floor first.If we find cracks, we fill them with the right repair material. Next, we check the slope. A shower floor must drain at a quarter inch per foot toward the drain. Water that sits flat grows mold fast. We correct the slope before any tile goes down.
  • After that, we apply a Waterproof Membrane where the floor meets the wall. This keeps water from sneaking under the tile edge. We also connect the membrane to the drain so nothing gets trapped underneath.
  • This process takes extra time. But it is the reason our tiled showers last ten or twenty years instead of two.
Homeowners in Encanto, Tempe, Gilbert, and Chandler call us often to fix jobs where another contractor skipped this step. We do it right the first time.

Steam Shower Installation in Phoenix AZ

Some homeowners want more from their shower than just hot water. A steam shower gives you that. You step in, press a button, and the space fills with warm steam in minutes. Many Phoenix homeowners find steam showers a good way to unwind after a long day.
This is not a basic upgrade. A steam shower needs a fully sealed enclosure, a dedicated electrical circuit, and a Steam Generator installed correctly. We have built steam showers in Phoenix, Scottsdale, and Paradise Valley. We know every step of the process.

How a Steam Shower Works

  • A Steam Generator is a compact unit that heats water and pushes steam into the shower. It connects to your water line and a 240-volt electrical circuit. Steam enters through a small outlet built into one of the shower walls.
  • For steam to fill the space correctly, the whole shower must be sealed. The walls, ceiling, and floor all need a continuous waterproof layer. Also, the ceiling must slope slightly so condensation runs to the sides instead of dripping straight down on you.
  • We handle the tile, the waterproofing, the generator, and the control unit. A licensed electrician handles the 240V circuit and its permit. We coordinate the full build so both trades work together at the right stages.

What We Include in Every Steam Shower Build

A complete steam shower build from our team includes the following.

01

Sealed Enclosure Setup

The sealed enclosure comes first. We apply a vapor-tight membrane to the walls, ceiling, and floor. This keeps steam inside and keeps moisture out of your wall framing.

02

Tile Installation

Next, the tile. We use steam-rated Porcelain Tile and adhesive. Standard tile adhesive breaks down in the heat and humidity of a steam environment. We pick products that handle it without cracking or pulling away from the wall.

03

Steam Generator Installation

Then the Steam Generator. We size it based on your shower's cubic footage. A unit that is too small will not heat the space. One that is too large wastes energy.

04

Bench or Seating Installation

Also included is a tiled bench or seat if you want one. Most people who use steam showers prefer to sit. We can build it into the shower during construction.

05

Digital Control Panel Setup

Finally, we mount a digital control panel on the wall. You set the temperature and timer from inside the shower. Some models connect to a smartphone app.

Shower Remodeling Questions Phoenix Homeowners Ask

Here are the questions we hear most often from homeowners across Phoenix and the Valley.
How much does a shower remodel cost in Phoenix AZ?
Most shower remodels in Phoenix range from $3,500 to $15,000 or more. A basic tiled surround costs less than a full steam shower build. The price depends on your shower size, tile choice, and whether any structural or plumbing work is needed. We give you a written quote before we start. See our Tiled Surrounds and Steam Shower sections above for a full breakdown.
Concrete Prep is the process of cleaning, repairing, and leveling your shower floor before tile goes down. It also includes applying a Waterproof Membrane where the floor meets the wall and where the tile meets the drain. Skipping this step causes tile and grout to fail faster. In Phoenix heat, that happens sooner than most homeowners expect. We complete full Concrete Prep on every shower we tile. See our Concrete Prep section above.
Most tiled shower surrounds take three to seven days from start to finish. This covers removing old materials, installing Cement Backer Board and Waterproof Membrane, setting the tile, grouting, and sealing. More detailed tile patterns take a bit longer. We give you a clear daily schedule before we begin.
Yes. We build custom steam showers for homeowners across the Phoenix metro area. We handle the tile, the sealed enclosure, the Steam Generator, and the control unit. A licensed electrician installs the 240V circuit and its permit. We manage the full build sequence. See our Steam Shower section for everything included.
Porcelain Tile is the best choice for steam showers. It does not absorb water or steam. It also holds up well in Phoenix heat. We avoid natural stone in steam showers unless a sealer is applied and kept up regularly. We walk you through the best options for your build during your free visit.
Yes. If your shower base is cracked, soft, or draining poorly, we fix those problems before any new tile goes in. Tiling over a damaged base brings the same problems back faster. We check every base before we tile it.
We serve all of Greater Phoenix. This includes Scottsdale, Arcadia, Biltmore, North Central Phoenix, Ahwatukee, Desert Ridge, Encanto, Chandler, Gilbert, Tempe, Glendale, Peoria, Surprise, Avondale, Mesa, and Paradise Valley. Call us at [CLIENT: PHONE NUMBER] to book a free visit.
Scroll to Top